[rollei_list] Re: Rolleimeter
- From: "John Wild" <JWild@xxxxxxxxxxxxxxxxxxxxxx>
- To: <rollei_list@xxxxxxxxxxxxx>
- Date: Tue, 10 Jun 2008 14:43:45 +0100
Thanks Carlos.
-----Original Message-----
From: rollei_list-bounce@xxxxxxxxxxxxx
[mailto:rollei_list-bounce@xxxxxxxxxxxxx] On Behalf Of Carlos Manuel Freaza
Sent: 10 June 2008 11:16
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] Re: Rolleimeter
John, Rolleiflex cameras with removable hood can't use the Rolleimeter because
there is no room enough behind the nameplate to fit the Rolleimeter claws;
while cameras with no removable hood have a groove or channel in the viewfinder
hood base, cameras with removable hoods don't have this groove, nameplate edge
and hood base have the same "level" and then the difference for both types of
cameras is the hood base mainly.
This is the reason Rolleimeters 3.5 and 2.8 made with the slot for the
sellenium cells are for the 2.8E and 3.5E only.
The Rolleimeter needs to be adjusted for the real focal length and to infinity
before to use it.
Carlos
--- El mar 10-jun-08, John Wild <JWild@xxxxxxxxxxxxxxxxxxxxxx> escribió:
> As Carlos has said, there are two versions of each type of
> Rolleimeter, one for cameras without meter and the second version with
> a shaped cutout to the lower part of the frame, which clears the
> exposure meter cell.
>
> I have a 3.5 and a 2.8 Rolleimeter. The 2.8 version fits my Rolleiflex
> 2.8E with meter but will not fit my Rolleiflex 3.5F, neither will the
> 3.5 version. There appears to be a slight difference to the rear of
> Rolleiflex nameplate on the 3.5F, such that the claws on the
> Rolleimeter do not grip the later nameplate in the way that they do on
> the earlier version. It is the later cameras, with removable
> viewfinder hood, that have a different shaped nameplate. The alignment
> of the Rolleimeter fixing is not the same because of this difference.
> The Rolleimeter is rigid on the 2.8E (having a fixed viewfinder hood)
> but just 'slides off'
> the 3.5F with removable hood. Hence, I guess that the Rolleimeter will
> not fit a Rolleiflex TLR with removable hood.
>
> Essentially,the 2.8 and 3.5 Rolleimeter versions are the same meter
> but supplied with a different chrome adjustment fitting and screw
> (marked
> 2.8 or 3.5)and calibration dial to fit over the focusing knob. The
> basic factory mirror alignment is by screws under the small leather
> cover on top of the 'peep' window. See repair manual for this
> adjustment.
>
> John
>
>
> -----Original Message-----
> From: rollei_list-bounce@xxxxxxxxxxxxx
> [mailto:rollei_list-bounce@xxxxxxxxxxxxx] On Behalf Of X.TRUONG
> Sent: 09 June 2008 21:01
> To: rollei_list@xxxxxxxxxxxxx
> Subject: [rollei_list] Rolleimeter
>
>
> Dear,
>
> I have two Rolleimeter, one for 3.5 and another for 2.8, I can stick
> the
> 3.5 to my Rollei Automat but the 2.8 can't stick to Rollei 2.8E.. As
> it would seem by 2.8E's meter. Why?
>
> Xuan Truong
>
> ---
> Rollei List
>
> - Post to rollei_list@xxxxxxxxxxxxx
>
> - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
> in the subject field OR by logging into www.freelists.org
>
> - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe'
> in the subject field OR by logging into www.freelists.org
>
> - Online, searchable archives are available at
> //www.freelists.org/archives/rollei_list
>
>
>
>
> ---
> Rollei List
>
> - Post to rollei_list@xxxxxxxxxxxxx
>
> - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
> in the subject field OR by logging into www.freelists.org
>
> - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe'
> in the subject field OR by logging into www.freelists.org
>
> - Online, searchable archives are available at
> //www.freelists.org/archives/rollei_list
__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
¡Abrí tu cuenta ya! - http://correo.yahoo.com.ar
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the
subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
