[rollei_list] Re; Rolleicord 2 Shutter

There is a cable release socket on the Compur Rapid of course.
You can see where the cable release ought to be here:
http://i60.photobucket.com/albums/h25/Primus96/Photography/102_0242.jpg
On this Compur Rapid the cable release hole is immediately to the right of the shutter cocking lever. You can just see it through the slit. Is it going to be possible for a tech guy to loosen the locking ring that holds the Compur into the front panel and rotate it the necessary amount to bring the cable release socket into line with the cut in the front panel provided ? I wondered how the indicators for the shutter and aperture work. Can the shutter be rotated and the indicators still show the correct speed? I have not seen a picture of a Rollecord partially stripped to have any idea of what it would look like under that figure of 8 cover over shutter & viewing lens. How can you unscrew the filter mounts on both lenses as they seem to be holding that cover on?. Would a 'Cord with the Compur rapid as standard have a slightly different cover with the various slits for the levers in different p-laces? 
---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: