Manny, Yes, but do you have the roll film adapter (pressure plate) for the plate back? I know that Todd Belcher has one. Jerry bigler@xxxxxxxx wrote: > > This morning it was offered to me a Rollei plate > > adapter; > > Carlos. I have this adapter. I even have the ground glass attachment. > > You do not have to use glass plates. The plate holder should be > shipped with one 1mm thick intermediate plate that allows you to use > regular cut film. If you do not have this plate you can fabricate one > yourself. > > The size is 6,5x9cm actually 2"-1/2 x 3"x1/2 or 63.5x88.9mm. The > important dimension is the length of 3"-1/2 = 88.9mm in order that the > film is clamped and pressed by springs plus the intermediate plate. > You cannot use US-size 2"x3" cut film which is 2"-1/4 x 3"-1/4 and is > too short to be properly clamped. Ilford does have 6,5x9 cut film as > well as Efke and other films distributed in the US for vintage > cameras. Or you can cut bigger film. > > -- > Emmanuel BIGLER > <bigler@xxxxxxxx> > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' > in the subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with > 'unsubscribe' in the subject field OR by logging into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.0.394 / Virus Database: 268.8.2/357 - Release Date: 06/06/2006 --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list