[rollei_list] Re: Harrison and Harrison filters - an answer from H&H

I predict that you will detect no difference in the results. If there is a difference, I believe that it would not show up until you get up to at least 30"x30" prints. Or larger. 

IMHO.
I use B+W glass, Lee resin, Hi-Tech resin, Tiffen glass, and a glass filter doped with a mixture of neodymium and praseodymium. I make large and very large prints, my largest from a 6x6 transparency is 50"x50" which used the doped glass filter. I've never seen any filter degradation, but, I am extremely careful about using filters since many of my filters are uncoated. I'm very cognizant about flare producing situations and do whatever is necessary to eliminate flare. 

Jim


At 03:55 PM 5/16/2007 -0400, Robert Lilley wrote:


Great black box, hmmm - Well, I've ordered a B+W series 6 medium yellow #8
filter from B&H and when it comes in, I'll test it against H&H's medium
yellow #8 with the nomenclature on the glass.  What's interesting is that
this B+W filter and size is about the same price I paid H&H.  Will let you
all know results of the shoot out.

Rob


---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: