[rollei_list] Re: 2.8E Film advance Issue

List of "authorised" Rolleiflex repairs shops:
http://homepage.mac.com/fwstutterheim/rolleigraphy/ rolleiflex_service.htm 

Ferdi.

Op 19-feb-2007, om 8:55 heeft Zachary Kessin het volgende geschreven:
I have a rollei F2.8E (circa 1957) that I was given some months ago. It has worked pretty well up until the last few rolls. It seems that now when I load film the film advance mechanism never comes to a stop, so it is impossible to know when I have advanced the film unto the next stop. One solution is just to go "too far" and always turn the crank 360deg, It would probably mean that I only get 6-8 shots per roll, but thats better than nothing.
Is there a simple fix for this that will not cost me a fortune. the camera repair shop said it would be at least 1000NIS (about $250 ) in labor alone to fix, so I would like to be able to avoid this if I can. 

--Zach
---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list



---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: