[rollei_list] Re: 2.8E Film advance Issue
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <rollei_list@xxxxxxxxxxxxx>
- Date: Mon, 19 Feb 2007 00:34:49 -0800
----- Original Message -----
From: "Zachary Kessin" <zkessin@xxxxxxxxxx>
To: <rollei_list@xxxxxxxxxxxxx>
Sent: Sunday, February 18, 2007 11:55 PM
Subject: [rollei_list] 2.8E Film advance Issue
I have a rollei F2.8E (circa 1957) that I was given some
months ago. It has worked pretty well up until the last few
rolls. It seems that now when I load film
the film advance mechanism never comes to a stop, so it is
impossible to know when I have advanced the film unto the
next stop. One solution is just to go "too far" and always
turn the crank 360deg, It would probably mean that I only
get 6-8 shots per roll, but thats better than nothing.
Is there a simple fix for this that will not cost me a
fortune. the camera repair shop said it would be at least
1000NIS (about $250 ) in labor alone to fix, so I would
like to be able to avoid this if I can.
--Zach
Check with a couple of independent repair people about
prices. My suspicion is that the wind mechanism is hanging
up due to dryed out lubricant.
Here are a couple of people to try:
Harry Fleenor is a magician but not cheap:
OCEANSIDE CAMERA REPAIR
909 AVIATION BLVD. #4
MANHATTAN BEACH, CA 90266
310-374-6506
http://www.rolleirepairs.com
Paul Ebel has been highly recommended by some memebers of
this list.
Paul Ebel
420 21st N
P.O. Box 141
Menomonie, WI 54751
AFAIK he has no web presence.
John DeLoach has been recommended by some list members
John F. DeLoach at jfd@xxxxxxxxxxxxxx
Krikor was a technician for Marflex, long the Rollei
warrenty repair station in the US.
Krikor Maralian
Krimar Photo Shop
105-B Broadway
Elmwood Park, NJ 07407
201 796-0554
I am sure you will get more recommendations from others
on the list.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list
- Follow-Ups:
- [rollei_list] Re: 2.8E Film advance Issue
- From: Zachary Kessin
- References:
- [rollei_list] 2.8E Film advance Issue
- From: Zachary Kessin
Other related posts:
- » [rollei_list] 2.8E Film advance Issue
- » [rollei_list] Re: 2.8E Film advance Issue
- » [rollei_list] Re: 2.8E Film advance Issue
- » [rollei_list] Re: 2.8E Film advance Issue
- » [rollei_list] Re: 2.8E Film advance Issue
- » [rollei_list] Re: 2.8E Film advance Issue
Is there a simple fix for this that will not cost me a fortune. the camera repair shop said it would be at least 1000NIS (about $250 ) in labor alone to fix, so I would like to be able to avoid this if I can.
--Zach
- [rollei_list] Re: 2.8E Film advance Issue
- From: Zachary Kessin
- [rollei_list] 2.8E Film advance Issue
- From: Zachary Kessin