[rodgersorgan] Re: factory settings/smart card question


Hi Karen.
Memories 1,2 anm3 come preloaded from the factory (Dan Miller I think)
Unless you write to the smart card, the organ will still draw on the organ 
memory.
Ralph
At 09:04 AM 6/27/2002 -0400, you wrote:

>Hi all,
>
>I did a demo of the T797 for a church committee this past week. (More than
>twenty people drove nearly an hour to hear the instrument--and then spent two
>hours in a sweltering church. That ducky little organ really wowed 'em!)
>
>I used a brand new smart card for my registrations. After filling up folder
>A, I was about to start on folder B when I discovered that there were
>combinations already set on at least three of the memory levels.  Didn't have
>time to do more than a quick check-thru, but the Generals on Memory One
>seemed to be a smooth build-up from pp to a rather full organ.
>
>As I was using a virgin card, I expected that all the pistons would initially
>be blank. So my question is: where did these combinations come from?  Are
>these the Dan Miller "factory inspired" settings?
>
>I don't have an owner's manual in front of me which would give directions on
>how to find (restore) the factory settings. Since these settings are
>"lurking" on the instruments, is it possible that they are accessed via the
>smart card?
>
>Karen Keene

Other related posts: