[riscos-printing] Re: Samsung problem with gutenprint
- From: Martin Wuerthner <lists@xxxxxxxxxxxxxxx>
- To: riscos-printing@xxxxxxxxxxxxx
- Date: Wed, 28 Feb 2007 16:51:42 +0100
In message <62b0eebb4e.martin@xxxxxxxxxxxxxxxxxxx>
Martin Wuerthner <lists@xxxxxxxxxxxxxxx> wrote:
> In message <a22feabb4e.john@xxxxxxxxxxxxxxxxxxxxxx>
> J Peachey <john@xxxxxxxxxxxxxx> wrote:
>
>> I have been trying gutenprint out with a Samsung ML4600 (Mono Laser)
>>
>> I have run into a problem,
>>
>> Having installed Gutenprint - I can now print a single page. However
>> if I try to print 2 pages, after the first has been sent to the
>> printer (The gutenprint window changes to printing 2 of 2) I get the
>> following message
>>
>> Fatal signal received : Segmentation fault
>>
>> Stack Backtrace
>> Running thread 0xd053c followed by more technical stuff. Which I can
>> provide if needed.
>
> Yes, that would be useful.
I have just managed to reproduce the problem here, so there is no need
to send any further information.
This problem with multi-page output seems to occur with the PCL driver
only and only when Gutenprint uses dynamic area memory, i.e., on all
machines but the Iyonix.
Martin
--
---------------------------------------------------------------------
Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx
---------------------------------------------------------------------
Other related posts:
