[riscos-printing] Re: HP CP1515n

On 19 Mar 2012  John Sandford <lists@xxxxxxxxxxxxxxxxxx> wrote:

> Peter Young <pnyoung@xxxxxxxxxxxx> wrote:

>> I need to replace my Xerox Phaser, as it's become seriously unreliable.
>> I'm interested in the HP CP1515n which CJE sell, and will almost certainly
>> buy this, as I will then know it will work with RISC OS. However, I need
>> to have it network-attached using RemotePrinterFS. I have the Phaser
>> connected this way at present, but I rather founder in attempts to get
>> RPFS set up correctly, and needed quite a bit of help over getting the
>> Phaser connected. Any hints as to how to get this new printer connected
>> would be very gratefully received.
>> 
>> With best wishes,
>> 
>> Peter.
>> 
> You should have a look at !Printspool by Ian Hamilton, I have used both in
> the past and found Printspool easy to setup.

Many thanks, John, and I've downloaded it and looked at the help file. 
It gives all sorts of information, but no word on how to set it up! 
Brian has given me the necessary information for setting up 
RemotePrinterFS, so I'll use that.

With best wishes,

Peter.

-- 
Peter   \  /      zfc Hf     \     Prestbury, Cheltenham,  Glos. GL52
and      \/ __            __  \                              England.
family   / /  \ | | |\ | /  _  \      http://pnyoung.orpheusweb.co.uk
        /  \__/ \_/ | \| \__/   \______________ pnyoung@xxxxxxxxxxxx
------------------------------------------------------------
    To change, suspend or cancel your subscription go to
       http://www.freelists.org/list/riscos-printing
------------------------------------------------------------

Other related posts: