Hey Tom,
We have a budding window-eyes user my fine student Eddie who is
learning to record his libraries of tapes and such just got him a
lexicon alpha, a nice simple usb interface for his fast laptop, it's
a dual core machine.
I've banged on Doug long enough, I'm re-doing those setfiles to work
with 7.
Now I've got a question for you.
And this is reaching way back, so if you can't remember, it's ok,
you've probably been to pluto and back twice by now 'grin'.
but you usually follow a very logical programming patern and I see
it over and over in these setfiles, hyperactive windows trigering
user windows to activate and do a certain action, this is in the
plug-in windows.
Now, I saw a departure in the sf7delay.000 setfile, and you
referenced something called the delay editor, but the hyperactive
window actually triggered something else.
Is there a delay editor ie another section in there where we can do
stuff?
Because the actual field which is next is mod rate, and for the life
of me, I can't get that hyperactive window to focus on that field,
it won't trigger, and I've tried all the tricks.
So far on all the other setfiles, I've had to move windows around a
bit, and assign some text strings in hyperactive windows for some
controls that just won't talk even when you activate a window around
them, this is some of the stuff that got broken between 6.1 and 7
yikes.
So what does the programming master say?
YOu may not even have a way to mess with 7 anymore, but the reason I
like 7 is that it doesn't depend on dot net framework, and doesn't
have that bug in it with the stopping of loop preview which never
worked right on sf8 for me.
And they pulled the rug out from under you with 9 so, we need to get
one version really working right atleast, or be chasing our tails
forever 'grin'.
Now, back to this mis-behaving field I can't pin down with a
hyperactive window in the delay, it's the multi-tap delay window.
I could use a field name, but
you can't do anything with that like activate a window or such.
So any ideas?
In this plug-in the hyperactive window c is triggering the wet out
and the very next one is for mod rate.
I can see the tag for the mod rate, and usually either lining up the
window with twice presses of the f5 and f6 will find the cordinates,
or going a bit above and to the left or right depending on whether
your defining a top or bottom cordinate can fix the problem but this
one won't work.
I can make a user window to track the value of the slider for the
mod rate.
But not for the hyperactive window to trigger it.
Help, help 'grin'.
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 4484 (20091006) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
