[raspberry-vi] Re: Changing iMages on an SD Card

  • From: Mike Ray <mike@xxxxxxxxxxxxxxx>
  • To: raspberry-vi@xxxxxxxxxxxxx
  • Date: Thu, 23 Mar 2017 14:31:50 +0000


Yes the M in:

bs=1M is a capital M.

And the volume of the card should *not* be mounted while the dd is being
done.



On 23/03/2017 13:36, Chris Norman (Redacted sender chris.norman2 for
DMARC) wrote:

Hi,

With a mac you want something like:



sudo dd if=whatever.img of=/dev/rdisk# bs=1m
The m at the end might be a capital, I can't remember.

Anyways, check in Disk Utility to see the disk names for your disks. 
Prepend whichever one you need with an r (for raw). That speeds up write 
speeds for you.

Don't forget to do something like:

sudo diskutil umount /dev/disk2s1

to unmount the volume... You might also be able to do:

sudo diskutil umount /Volumes/whatever

to unmount the volume.

Don't use eject, since I believe this makes the disk inaccessible to the 
OS... as in removes the entry in /dev.

HTH,
On 23/03/2017 09:07, Mike Ray wrote:
Chuck

I don't use a Mac myself but I know that Mac is BSD under the hood so at
a terminal prompt you need to use dd.

But be very careful because if you give the wrong destination to dd you
can wipe your hard disk.

In Linux the command is:

sudo dd bs=1M if=infile.img of=/dev/sdx

Where /dev/sdx is the device name given to the card when you plug it in
to the computer either in a card slot or with a card reader.

infile.img is replaced with the name of the image you want to write.

But...you will get no better results without a USB audio dongle as
espeak will stutter. The Raspbian image on the site for download needs a
USB dongle for Orca to work.

Any USB dongle with the same chip-set as the Daffodil USB dongle will
work.  Google for suitable cards that are known to work with a Pi.  The
e-linux site has a list of suitable dongles and other devices.

Mike


On 23/03/2017 02:55, chuck winstead wrote:
Hi All,
Does anyone have any recommendations  for changing the SD Card image?
I've not been having the best of Luck with Ubuntu Mate, not sure if it is 
an audio problem as i don’t own any USB Audio device nor do I know which 
Audio device is best.
So I am wanting to erase Ubuntu Mate, and install Raspbian.
I use a Mac, and I have the Pi Filler, Pi copier, and Pi finder 
applications. Pi copier is not geared for this purpose.
I’d like to see if any one has any suggestion on how to go about this.
I plug it in and Mac OS says it does not notice the card. probably due to 
the fact it’s formatted differently. So What would I need to do to I guess 
reverse engineer it.
Would it be a Terminal prompt?
Thanks in advance.
Chuck===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views 
and attitudes expressed by the subscribers to this list do not reflect 
those of the Foundation.

Mike Ray, list creator, January 2013



=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of 
the Foundation.

Mike Ray, list creator, January 2013



-- 
Michael A. Ray
Analyst/Programmer
Witley, Surrey, South-east UK

Eyes-free Linux:
http://eyesfreelinux.ninja/

Raspberry VI:
http://www.raspberryvi.org/

=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of the 
Foundation.

Mike Ray, list creator, January 2013

Other related posts: