[racktables-users] Re: Unable to link ports after upgrade

From: Denis Ovsienko <pilot@xxxxxxxxxx>
To: racktables-users@xxxxxxxxxxxxx
Date: Fri, 6 Nov 2009 12:39:41 +0300

> I notice that I'm getting the blank page for network and power ports but when 
> I click on a KVM (host) port it does show a list albeit an empty one as there 
> is no KVM switch in that row.
> If I try this on a KVM port in the same rack as a KVM switch I get the blank 
> window again.

Ray, could you check if this change solves the problem completely?
https://racktables.org/trac/changeset/3182/branches/RackTables/maintenance-0.17.x/popup.php
There seems to be a difference in ways PHP handles failures in different
environments, so I need it tested.

-- 
    Denis Ovsienko

Follow-Ups:

[racktables-users] Re: Unable to link ports after upgrade
From: Killsystem

[racktables-users] Re: Unable to link ports after upgrade
From: Ray Robertson

References:
- [racktables-users] Upgrade to 0.17.6
  - From: Ryan McLean
- [racktables-users] Unable to link ports after upgrade
  - From: Ray Robertson
- [racktables-users] Re: Unable to link ports after upgrade
  - From: Denis Ovsienko
- [racktables-users] Re: Unable to link ports after upgrade
  - From: Ray Robertson

[racktables-users] Re: Unable to link ports after upgrade

Other related posts: