[racktables-users] Re: Question about snmp -

> Yesterday I added a Cisco 3560  24 port switch to my setup and I used
> the snmp finder and got a lot of good stuff like the Cisco IOS, and
> other general information, I also got the ports with mac addresses
> which is what I am looking to do with my cisco 3032's.   I added to
> the dictionary...  that part worked fine, and I get the ios, the host
> FQDN and other stuff but not the ports which is what I need the
> most.  

(Let me cite myself)

What is necessary:

1. Exact name of the model, as shown by "sh ver | inc processor"
2. Output of the following:
snmpwalk -v 1 -c public switchname sysDescr.0
snmpwalk -v 1 -c public switchname sysObjectID.0
snmpwalk -v 1 -c public switchname ifTable
3. Which modules were actually plugged in (GBIC, X2, 24/48xGE and so
on).

E-mail this off-list to me.

-- 
    DO4-UANIC

Other related posts: