[racktables-users] Linking ports

Hi,
In my server room each rack has a panel of 24 ports that are a direct connection to the main patch panel (R1/1 on the back of the rack maps to R1/1 on the main panel), we then connect the patch panel port to a dell switch to connect to the main LAN. 
So:
Rack: 1 contains server 1.
Rack: 2 (I use rack in the loosest possible sense of the word) contains the patch panels and switches. 

Server 1 eth0 connects to the panel port R1/1 at the back of the rack.
R1/1 on the main patch panel connects to Dell Switch 2 port 23.
I want to map the whole connection (so looking at the server tells me it is connected to r1/1 and then when I look at the patch panel object that has r1/1 I can see it connects to the dell switch 2 port 23. 

Is this level of mapping possible?
I am trying very hard to convince management to let me use this software to track my server room as I really like it, however we need to be able to track the port connections and if I cant do that then it is a show stopper for using racktables. 

Thanks in advance.

Regards,

Ryan

Other related posts: