[python] Re: python 406

Torben Scheel wrote:
> If you use ISO 451 wheels the radius should be around 260mm - My
> Python has a wheel radius of ~338mm. That gives 78mm lower free
> height than mine which is around 14cm. It would be possible to raise
> the lowest points around 20mm without too much hassle. It's not
> optimal, but it's sure nice that the bike is easy to separate.

Correction : my free height is ~170mm. You could get ~92mm.

Regards,
Torben


============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: