[python] Re: px5 stability
- From: Olaf Johansson <noll@xxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Tue, 29 Mar 2005 18:39:06 +0200
Perhaps it will work, but what will it contribute?
When steering with your body you need a firm place as center for your
movements. Imagine putting an ordinary bike seat on a swivel, it would
not make things easier.
The impact from pedalling upon steering has been no problem for me on
my flevo bike. However, reducing crank length can be a way to go for
the high-cadence rider.
Olaf
On Mar 29, 2005, at 18:04, ebooth@xxxxxxxx wrote:
What if, instead of rigidly fixing the seat bottom to the front
steering
assembly, one attached it to the rear assembly on a swivelling mount,
with the
seat back separately and firmly connected to that aft part of the
frame? Perhaps
this would accomplish what Frank has in mind.
Eric
Quoting Olaf Johansson <noll@xxxxxxxxx>:
In the original set up with the seat attached to rear part you use a
mixture of leaning the legs and swivelling the hip in order to steer.
If you sit on the front part of the frame – the part that is to be
steered – it will be impossible to manoeuvre the bike unless your
shoulders were tightly strapped to the back rest. Even then steering
would be a real stunt ;o)
Olaf
On Mar 28, 2005, at 21:18, Frank Parmir wrote:
Hi Jurgen, I've been reading the list for several monts. A while
back
you reported the px2 was not as stable at high speeds as the p1 and
p3. Is the px5, which has the pivot moved to the rear any more or
less
stable? I hope to begin building the first python in Columbus, Ohio
(USA) very soon and am anxious to hear. Also, I am thinking of
attaching the butt bucket part of the seat to the front half to
eliminate pedaling perturbance. I will still attach the back support
with arm rests for shifters and brakes to the back half. That means
steering by swiveling the hips, not just the legs. Do you have any
predictions about how sucessful that might be.
Also, I'm a little woried. You haven't posted since your speed
record.
Are you OK?
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
- Follow-Ups:
- [python] Re: px5 stability
- From: Dirk Bonne
- References:
- [python] px5 stability
- From: Frank Parmir
- [python] Re: px5 stability
- From: Olaf Johansson
- [python] Re: px5 stability
- From: ebooth
Other related posts:
- » [python] px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
- » [python] Re: px5 stability
Perhaps it will work, but what will it contribute?
Olaf
On Mar 29, 2005, at 18:04, ebooth@xxxxxxxx wrote:
assembly, one attached it to the rear assembly on a swivelling mount, with the
seat back separately and firmly connected to that aft part of the frame? Perhaps
this would accomplish what Frank has in mind.
Eric
Quoting Olaf Johansson <noll@xxxxxxxxx>:
In the original set up with the seat attached to rear part you use a mixture of leaning the legs and swivelling the hip in order to steer. If you sit on the front part of the frame – the part that is to be steered – it will be impossible to manoeuvre the bike unless your shoulders were tightly strapped to the back rest. Even then steering would be a real stunt ;o)
Olaf
On Mar 28, 2005, at 21:18, Frank Parmir wrote:
Hi Jurgen, I've been reading the list for several monts. A while back
you reported the px2 was not as stable at high speeds as the p1 and
p3. Is the px5, which has the pivot moved to the rear any more or less
stable? I hope to begin building the first python in Columbus, Ohio
(USA) very soon and am anxious to hear. Also, I am thinking of
attaching the butt bucket part of the seat to the front half to
eliminate pedaling perturbance. I will still attach the back support
with arm rests for shifters and brakes to the back half. That means
steering by swiveling the hips, not just the legs. Do you have any
predictions about how sucessful that might be.
Also, I'm a little woried. You haven't posted since your speed record.
Are you OK?
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
============================================================
- [python] Re: px5 stability
- From: Dirk Bonne
- [python] px5 stability
- From: Frank Parmir
- [python] Re: px5 stability
- From: Olaf Johansson
- [python] Re: px5 stability
- From: ebooth