[python] Re: no weld python

Hi all,
As for the "bolts 'n screws only" approach, there's www.einfaelle-statt-abfaelle.de (German language only) with quite some good ideas for tandems, choppers and transport bikes. I bought the collection of bike related issues (www.tinyurl.com/4zjzsd), it's (mostly) worth it.
I have a workshop, but welding is a problem for me, too. I can't tell what minimum requirements a used machine would need to meet. I'm too stingy for a new MIG/MAG or TIG, but too demanding to use my simple electrode welder. Very low cost MIG/MAG/TIG machines are known for poor results and unwieldy performance, particularly with thin bike tubes. I'd spend around 200-300 EUR on Ebay, preferably for a used TIG (in Germany: WIG), if I knew what specs to look for, and how to tell quality from scrap. Brazing is no option, as my landlord wouldn't allow it. 


Cheers,
Marek


Marek Möhling
Naunynstr. 82
10997 Berlin
Germany
Tel:  +49 30 347 676 95
Fax: +49 30 484 988 218 
============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: J�Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx 
with 'unsubscribe' in the subject field.

============================================================

Other related posts: