[python] Re: minq -- devious!

Dirk Bonné wrote:

>May be I am just imagine things, but looking more at the minq2 pic, they
>might have a solution --without rollers!!!
>
>If you have the rotation axis going very near to the end of the
>derailleur (the lower roller), you minimize the stress on the
>derailleur. In such a case the positon of the end of the derailleur
>doesn't change much when you turn!
>  
>
Errmm, really should read my mails before sending them off. With
rotation axis I mean the turning axis of the headset, which goes
supiciously near to the bottom roller of the rear derailleur. May be
that is by design. Thats what I wanted to say.

>It is a compromise of course, as you will always have a distance of the
>rotation axis to the tip of the derailleur, but may be they figured it
>acceptable.
>  
>
>Dirk
>
>============================================================
>
>This is the Python Mailinglist
>
>http://www.freelists.org/list/python
>
>Listmaster: Jürgen Mages jmages@xxxxxx
>
>To unsubscribe send an empty mail to 
>python-request@xxxxxxxxxxxxx
>with 'unsubscribe' in the subject field.
>
>============================================================
>
>
>  
>

Other related posts: