[python] Re: frame jig




Man, you have 3-channel stereo in the workshop!

olaf




On Mar 16, 2005, at 21:01, Jürgen Mages wrote:

Hello folks,

by request I uploaded a picture of the frame jig that I used
for my PX constructions:

http://www.python.tieflieger.net/pics/frame%20jig.jpg

I did not use it for my previous pythons but now I would
strongly recommend such a device because it saves a lot
of time, nerves and in the end allows more exact
building than just lining everything up by eye accuracy.

BTW this jig has some historical value. Sergio Gomez
build his first ZOX recumbents with it. I only had to add
the second arm for the rear dropout (that´s where I got
my zinc poisoning from ;-)

Cheers,
Jürgen.

PS: Springtime has finally started here :-)

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================


============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: