[python] Re: driving experience TT

Hi Mike,
I now recall seeing your page, so that was probably back in my brain.
http://www.odyssey.on.ca/~mchannon/A3/P2.jpg
With the close placement of the pivot to the wheel, you definitely need both 
attached to the rear, but the angle of pivot to front frame is fixed. Jürgen 
could turn the top one around in his P4 geometry. The other nice thing that tie 
rods would add is that the pivot would not need to be disassembled to adjust.

BTW, Greg sure has a great project!

The forecast is rain today/this weekend, so I'm going to cut some new frame 
parts. There. I said it! 
;-)

Ray

At 10:27 PM 3/30/2005 -0500, you wrote:
>I have that feature with my Python as I used rod end bearings for the pivot.
>(Picture on the modifications page of the Python web site.)  Unfortunately
>they are now adjusted to the extreme to get my angle.  The only adjustment
>now available is to steepen the angle. 
>
>I think that auto tie rod ends would work well.  I think they would last a
>long time, considering their longevity in the auto.
>
>Regards,
>
>Mike Channon

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: