[python] WG: Re: New Python

hei jürgen and posse,
put a good transmission on this somewhat fatter if smaller one should be
nice. but there must be limits to the vergnügen. this is a great thing
you run, best regards! 
careful now,
tobi

-----Ursprüngliche Nachricht-----
Von: python-bounce@xxxxxxxxxxxxx [mailto:python-bounce@xxxxxxxxxxxxx] Im
Auftrag von Jürgen Mages
Gesendet: Dienstag, 3. Juni 2008 19:39
An: python@xxxxxxxxxxxxx
Betreff: [python] Re: New Python

Hello Jaime,

Tobias Gommel has built a python with really fat tires. See attached 
picture. I think that apart from such a 20" front wheel there is no 
other realistic solution for your inseam length.

On this page http://en.openbike.org/wiki/Pivot you will find a brief 
overview of steering pivot solutions. Ordinary steering heads have 
already been tried. A friend of mine has one and there is no sign of 
wear or play yet (1000 km), so I would give it a try.

Cheers,
Jürgen.



On 03.06.2008 17:33, Jaime Cristovao wrote:
> Hello all
> 
> Here I am again with a hand full of questions... After some days of 
> "frying metal" (as someone said before) and reading some very 
> interesting posts here on python's mailing list, I must say, but the 
> things that raises me questions are much more than the others. Maybe I

> raised the goals far above my skills, but I will not give up. So... 
> one question, maybe someone tried it before (I did not have the time 
> to read all previous posts, so maybe someone did): As I need a "fat" 
> front wheel tire, the "standard" python front wheel frame is a real 
> problem I was not able to solve yet. Solution (?): building an arch 
> over the front wheel from BB to center pivot, attached to the wheel 
> hub with a triangular structure. Does it seem practical to you (in 
> abstract)? Second question: In a previous post was discussed what is 
> better for the pivot. As I don't have another BB to use here, I was 
> planning to use a standard front wheel pivot from an old DF bike. Will

> it be a good choice? There are very strong forces involved in the 
> center pivot so... I am not sure. Maybe someone can help me based on 
> experience.
> 
> Thank you all,
> 
> Jaime
> 
> ============================================================
> 
> This is the Python Mailinglist
> 
> http://www.freelists.org/list/python
> 
> Listmaster: Jürgen Mages jmages@xxxxxx
> 
> To unsubscribe send an empty mail to
> python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
> 
> ============================================================
>

Attachment: 100_1664 copy~1.jpgcopy.jpg
Description: JPEG image

Other related posts: