[python] Re: VOILA: next Python finished

You guys do not know how fortunate you are to live in a country where you
can find the materials you want.  I had to fabricate my 10x40 out of flat
stock by bending 2 L shaped pieces and welding them together.

I do like the shape of your frame but I think that some angled braces are
needed to relieve some of the stresses. 

Where did you get the seat.. I like it.

Jim Sparks
 

-----Original Message-----
From: python-bounce@xxxxxxxxxxxxx [mailto:python-bounce@xxxxxxxxxxxxx] On
Behalf Of Jürgen Mages
Sent: Friday, December 15, 2006 2:32 PM
To: python@xxxxxxxxxxxxx
Subject: [python] Re: VOILA: next Python finished

Congrats Stephan - you made a beauty!

Glad that you finally could get the 40x10 material for the
front frame. And you did very well in placing the front brake
below the tubing and not above like I did by mistake in my
first tries.

> The Bike has a *Z-Frame*, the front ant the rear part have the same
> angle. The Frame is separable at the SBB by unscrewing 4 little
> screws. There is no suspension. The Wheels are both 26", with 55-559
> MTB-Tyres. I have fitted V-Brakes and 3x7 Gears.

You documented the SBB lock mechanism pretty good on your site.
The whole building process is greatly documented. If you have some
problems with the english language: Leo is your friend:
http://dict.leo.org/

The knobby wheels look fine, but you might prefer slicks in the
near future for faster and smoother riding.

> You can see it on the attached Picture or visit my project pages: 
> http://www.schoeling.net/python.html

Already linked. BTW what happend to Olaf Johansson's Monty page?
http://www.liggcykel.se/montypage.html
Dead since some days.

> @Juergen: If you'd like to put this python to your project-survey,
> i'd suggest to wait till the last work is done. Also I didn't do the
> terminal measurements of all the Frame -Geometry related things ;-) I
> hope to find time next week.

Hard to wait, but I'll have to be patient.

Beste Grüße nach Jülich,
Jürgen.

PS: Und nächsten Frühling ein großes Python Treffen in Germersheim ...
============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: