[python] Re: VOILA: next Python finished

Congrats Stephan - you made a beauty!

Glad that you finally could get the 40x10 material for the
front frame. And you did very well in placing the front brake
below the tubing and not above like I did by mistake in my
first tries.


The Bike has a *Z-Frame*, the front ant the rear part have the same
angle. The Frame is separable at the SBB by unscrewing 4 little
screws. There is no suspension. The Wheels are both 26", with 55-559
MTB-Tyres. I have fitted V-Brakes and 3x7 Gears.


You documented the SBB lock mechanism pretty good on your site.
The whole building process is greatly documented. If you have some
problems with the english language: Leo is your friend:
http://dict.leo.org/

The knobby wheels look fine, but you might prefer slicks in the
near future for faster and smoother riding.
You can see it on the attached Picture or visit my project pages: http://www.schoeling.net/python.html 

Already linked. BTW what happend to Olaf Johansson's Monty page?
http://www.liggcykel.se/montypage.html
Dead since some days.


@Juergen: If you'd like to put this python to your project-survey,
i'd suggest to wait till the last work is done. Also I didn't do the
terminal measurements of all the Frame -Geometry related things ;-) I
hope to find time next week.


Hard to wait, but I'll have to be patient.

Beste Grüße nach Jülich,
Jürgen.

PS: Und nächsten Frühling ein großes Python Treffen in Germersheim ...
============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx 
with 'unsubscribe' in the subject field.

============================================================

Other related posts: