[python] Re: Tubing/welding

Hi Bjørn,

welcome to our list.

I have build two pythons with 30x20 tubing. It is ok, but the part between
chainwheel and front tire you will have to make with narrower material.
I used massive steel plates here.
"Buzz boxes" will be ok for your first experiments.

Good luck,

Jürgen.


----- Original Message -----
From: "Bjørn Harbo" <bharbo@xxxxxxxxx>
To: "python" <python@xxxxxxxxxxxxx>
Sent: Thursday, May 06, 2004 3:11 PM
Subject: [python] Tubing/welding


Hello all,
I am a new member and thrilled by the thought of building a Python. My metal
work experience is minimal and I have a few questions:
I am unable to find (here in Oslo, Norway) tubing in the size 40x10x1,5 mm.
40x20x1,5 and 30x20x1,5 are available. What to choose?
Secondly: I have an extremely simple buzz box type welding machine. Would it
be sufficient or do I need the fancy stuff?
Bjørn

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: