[python] Re: Test ride
- From: Ray Schümacher <mtb@xxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Thu, 21 Apr 2005 17:44:59 -0700
At 07:33 PM 4/21/2005 -0400, you wrote:
>After looking at your picture, perhaps the problem is you are seated a
>little too low, and the BB is a little too high?
Yes, that's likely. I will just cut the rear frame joint and add 5-6 degrees.
It actually was over 60 before it broke when testing and I added the plate
steel strip. I will also raise the seat a few inches at the same time. Now I
need more cut-off wheels...
Ray
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
- References:
- [python] Test ride
- From: Ray Schumacher
- [python] Re: Test ride
- From: 25hz
Other related posts:
- » [python] Test ride
- » [python] Re: Test ride
- » [python] Re: Test ride
- » [python] Re: Test ride
- » [python] Re: Test ride
- » [python] Re: Test ride
- » [python] Re: Test ride
- » [python] Re: Test ride
- [python] Test ride
- From: Ray Schumacher
- [python] Re: Test ride
- From: 25hz