[python] Re: Starting to build

Thanks a lot Jürgen!

I sent the rear frame to welding today. Yesterday I've took from lathe the
bottom bracket shell and the pivot bearings box. With these two parts, I'll
cut the tubing and put on a jig the front frame. When both halves are
finish, I'll sent them to zinc plating (galvanoplasty) and finally to the
powder coating. I think that I'll need two more weeks to start the testing
season...

[]'s Eduardo

Ypê Bike: http://www.ypebike.cjb.net/
Ypê Mono: http://www.ype.unicyclist.com/



----- Original Message ----- 
From: "Jürgen Mages" <jmages@xxxxxx>
To: "Python Malinglist" <python@xxxxxxxxxxxxx>
Sent: Wednesday, March 17, 2004 7:02 AM
Subject: [python] Re: Starting to build


> > The first brazilian
> > Python is going to the road!
>
> ... and if Colin Morton from Australia will not build faster
> than you, it will be the first southern hemisphere python ;-)
>
> good luck Eduardo.
> ============================================================
>
> This is the Python Mailinglist at freelists.org
>
> Listmaster: Juergen Mages jmages@xxxxxx
>
> ============================================================
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.601 / Virus Database: 382 - Release Date: 29/2/2004

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: