[python] Re: Question for the experts

Recumbent Country wrote:
> The way I am envisioning this is as follows.
>
> 1) Rear wheel drive.
> 2) Standard Tadpole boom setup
> 3) The front Cross bar of the tadpole will be completely horizontal
> with the standard python steering frame joints on the outer ends of
> the cross bar.
> 4) Standard Python front sections using a front wheel instead of a
> rear wheel.
> 5) Where the bottom brackets on a python normally is, having a linkage
> join the two python booms together.
Is the BB attach with a boom to the rear, or is it still connected to
the front? If it is to the front then you have chain problem. If it is
to the rear, the bike is a standard tadpole but with the pivots causing
a negative trail (cause the advantage of self centering).
> 6) some type of handle bars to allow the rider to induce the lean for
> the steering.
>
> The purpose of this is to design is as follows:
>
> 1)    A self centering trike that can be the base platform for a
> velomobile.
> 2)    It will allow the use of standard bicycle parts without relying
> on special hubs for the front wheels.
> 3)   Allow higher gearing using as 26" rear wheel and using 16" or 20"
> front wheels with disk brakes.
> 4)   If building a velomobile the python frame joints could be built
> into the faring design for the front wheel mounts and to total encase
> the front wheels for aerodynamics.
>
> If someone is good with a sketchup I can try to provide further
> details if need be to help developing the plans.
>
>
> Doug Morency
> Osgoode, ON Canada

============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: