[python] Re: Python Suspension Rubber
- From: Jürgen Mages <jmages@xxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Tue, 10 May 2005 18:19:24 +0200
Daryl,
I use a similar one. The shape is cylindrical, 50 mm
diameter and 45 mm height. Shore is 80 degrees and
hole is M10.
I think yours is ok, but I would choose the harder
one.
Regards,
Jürgen.
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
- References:
- [python] Python Suspension Rubber
- From: Daryl Bender
Other related posts:
- » [python] Python Suspension Rubber
- » [python] Re: Python Suspension Rubber
- » [python] Re: Python Suspension Rubber
- [python] Python Suspension Rubber
- From: Daryl Bender