Hi James, just a side note: http://en.openbike.org We are also trying to gather some info in the wiki. Regards, DirkS James Sullivan <poitco@xxxxxxxxx> hat am 10. Mai 2010 um 04:35 geschrieben: > I have started on two bikes and I have some questions. I have read everything > that I could find on http://www.python-lowracer.de. and on Youtube.com. I > assume that the info from the Project Survey is from 2004-2006 and has not > been updated. What do most of the later bikes have for: > Ground clearance > Seat height > Wheelbase > Pivot angle > With a 26” front wheel, how high is the BB/Crank center from the ground. I’m > 180cm (5’9”)tall, 83.5cm (32.8”) inseam and am having problems with the ground > clearance of the pivot. I’m thinking that I will have to have a bend in the > front frame rails to change the angle. If so should the bend be in front or > behind the axle? Also, what is being used for the pivot other than a bottom > bracket? Are pivot parts custom made or off the shelf items? From what I see > of the Python bikes that have been built, the USA is far behind and we have > much to learn from the “Python World”. I thank Jürgen Mages and all of the > other owners/builders out there!! Again, THANKS for any help that can be > offered. > Jim > Poitco@xxxxxxxxx > > > > > ============================================================ > > This is the Python Mailinglist > > //www.freelists.org/list/python > > Listmaster: J�rgen Mages jmages@xxxxxx > > To unsubscribe send an empty mail to > python-request@xxxxxxxxxxxxx > with 'unsubscribe' in the subject field. > > ============================================================ >