[python] Re: (Python) More progress!

I don't have to much experience with the zephyr seat, but since it is
plywood it might be slightly adjustable to the form of your back. Personally
i don't like the flevobike seat to much, it is less beautifull than the
other dutch seats (nazca, optima and m5).
Here in Holland we have the luxury to go to a shop and judge which seat is
the best size, it's like fitting shoes. If posible try the seat before
buying.
All seats are pretty hot, but drilling large (4 cm) holes works a bit. I
even drilled holes in a carbon seat, so that is possible in both seats.

Milan

2007/10/15, Uipko Berghuis <uipko.berghuis@xxxxxxxxx>:
>
> On 10/15/07, Carl Punton <carlpunton@xxxxxxxxx> wrote:
> > Hi All,
> >   Managed to get a bit more done this weekend, I shortened the
> "backbone" &
> > tapered it, can't do anymore to that part now until I decide on a seat,
> I'm
> > leaning towards buying either a plastic "flevo" seat from Dutch speed
> bikes
> > at 46.50+14pp to Spain or a shaped plywood seat from Zephr (Holland,
> thanks
> > Dennis) at 33euro, waiting for a reply for postage.    I'm guessing that
> the
> > plastic seat is going to be pretty hot with or without foam, anyone got
> > experience of plastic versus plywood?.
>
> I've used the flevo seat for a while, didn't like it to mutch because
> it's to short. I heard a lot of good things about the zephyr seat. I
> think for the heat they are equal, only with the zephyr ones is easy
> to fix this problem by drilling holes in it.
> See this example how far you can go
> http://www.xs4all.nl/~aerocam/Ventisitlenden/Ventisitlenden.html
>
> Grtz,
> Uipko
> ============================================================
>
> This is the Python Mailinglist
>
> http://www.freelists.org/list/python
>
> Listmaster: Jürgen Mages jmages@xxxxxx
>
> To unsubscribe send an empty mail to
> python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
>
> ============================================================
>
>

Other related posts: