[python] Re: P4 Steering Pivot
- From: Jürgen Mages <jmages@xxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Tue, 27 Jul 2004 16:28:59 +0200
Hillel,
> >> The tapered roller bearings are bigger and heavier than the
> > angular contact ball bearings that Eduardo used, but as they
> > were taken from old car wheels they cost me nothing.
>
> Are there any seals to keep out road grime and dirt?
> Those bearings could get really messed up from dirt,
> sand, and salt and general road grime getting in there.
No seals. Under the seat the bearings are somewhat
protectet. I will grease them good and wait how they
perform. Luckily they are detachable. I think this is
not the case with angular contact ball bearings.
Jürgen.
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
- Follow-Ups:
- [python] Re: P4 Steering Pivot
- From: Eduardo L P Jr
- References:
- [python] P4 Steering Pivot
- From: Jürgen Mages
- [python] Re: P4 Steering Pivot
- From: Hillel Seltzer
Other related posts:
- » [python] P4 Steering Pivot
- » [python] Re: P4 Steering Pivot
- » [python] Re: P4 Steering Pivot
- » [python] Re: P4 Steering Pivot
- » [python] P4 Steering Pivot
- » [python] Re: P4 Steering Pivot
- » [python] Re: P4 Steering Pivot
- [python] Re: P4 Steering Pivot
- From: Eduardo L P Jr
- [python] P4 Steering Pivot
- From: Jürgen Mages
- [python] Re: P4 Steering Pivot
- From: Hillel Seltzer