[python] Re: New Trike
- From: Jürgen Mages <jmages@xxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Mon, 23 Oct 2006 22:12:02 +0200
What is the steering pivot made of?
The bearings are made of two pieces of Igus QFM-3034-37. they are
fixed in own-drilled Aluminium-Headsets. In the center is a 30x1 mm
Steelaxle. In this is pressed two aluminium Inlays whitch are fixed
with a 10mm screw in the middle.
That's all :-))
Hooray - finally someone who dares to use the Igus stuff for the
central pivot!
If this works out fine in the long run, it will be the lightest
pivot material ever.
Keep us in the loop Mark,
Jürgen.
What is the steering pivot made of?
The bearings are made of two pieces of Igus QFM-3034-37. they are fixed in own-drilled Aluminium-Headsets. In the center is a 30x1 mm Steelaxle. In this is pressed two aluminium Inlays whitch are fixed with a 10mm screw in the middle.
That's all :-))
Hooray - finally someone who dares to use the Igus stuff for the central pivot!
- References:
- [python] New Trike
- From: Jürgen Mages
- [python] Re: New Trike
- From: Mark Schaaf
- [python] New Trike
Other related posts:
- » [python] Re: New Trike
- » [python] New Trike
- » [python] New Trike
- » [python] Re: New Trike
- » [python] Re: New Trike