[python] Re: Max Speed 67 on Delta Trike

Ok, that was not what I meant. I forgot 'bout the fender stuff really. I
just wanted to promote handlebars again ;-)

Why not remove the fender and see what happens?

Dirk

Jürgen Mages wrote:
> Hej Dirk,
>
> I think I know what you mean: The 26" wheel with the taped fender is
> the source of the problem! This arrangement is very prone to
> crosswinds which makes me nervous at speeds above 50 kph.
>
> Some years ago, when I made my first big downhill with the P1 and
> without the taped fender, I didn't have a speedo, but a fellow riding
> behind me said, I was faster than 70 kph. Later I thought that his
> speedo was wrong.
>
> Did I get you right?
>
> Cheers,
> Jürgen.
>
> On 26.08.2007 11:41, dirk.bonne@xxxxxxx wrote:
>> Hi Jürgen,
>>
>> I disagree with you though that these high speeds are a sign of extreme
>> courage or something... but... when you closely look at the delta of
>> Nobuo, do you see something in common with my bike, or the bike of Mike?
>> ...something that is not on your bike... ;-p
>>
>> I add here the pictures made on the last trip of the speed dial each
>> time a new record was broken, but there were many times in Skåne -
>> Sweden (lots of hills) where we came close to the 60kmh range, and none
>> of them posed a special problem.
>>
>> Dirk
>
> ============================================================
>
> This is the Python Mailinglist
>
> http://www.freelists.org/list/python
>
> Listmaster: Jürgen Mages jmages@xxxxxx
>
> To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
>
> ============================================================
>

============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: