[python] Jig

Hi All

The last (and looooong) weekend, I've made the front frame jig... It is
almost ready. A pinewood board, and 8 custom made clamps. Today I'll clamp
the bearings shell and tomorrow it will be sent to welding.

The bike owner, is 1.69 m high and the gaps between the front frame and the
front tire, are extremely narrow.

The tires are two IRC Metro II 26 x 1.00. The total inflated diameter is 610
mm or 24". A good tip to people concerned with short legs...

[]'s Eduardo

Ypê Bike: http://www.ypebike.cjb.net/
Ypê Mono: http://www.ype.unicyclist.com/


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.637 / Virus Database: 408 - Release Date: 20/3/2004

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: