[python] Re: Fwd: Re: Prothon

Ok Ron,
i will build a new seat, sooner then intended....
I have no need to try to optimate something that is probably not going to work, 
and if it helps i will let you know;)
Best regards,Jérémy
-------- Original-Nachricht --------
> Datum: Sat, 04 Apr 2009 17:14:54 +0200
> Von: Ronald Hongsermeier <rwhongser@xxxxxx>
> An: python@xxxxxxxxxxxxx
> Betreff: [python] Re: Fwd: Re: Prothon

> Hello JeŽreŽmy,
> 
> Irfanview is pretty easy to get used to and is quite powerful, really.
> 
> On the seat, I think that Jürgen, if I understood him correctly was
> suggesting that you need more width in the structural part of the seat, not
> merely padding. I think your use of the foam you mentioned for padding is
> great, but it won't affect your bike control issues too much because it is 
> just
> too mushy. (Again, this doesn't mean that you shouldn't use it-- just that
> the frame under it has to direct control moment from your body to the
> wheels through the frame and the better the seat frame contacts your hips and
> holds onto your upper body, the more sideways moment you will be able to
> apply to the frame with less effort and bodily _overcompensation_. It's the
> overcompensation that is making it difficult for you to ride in my opinion.
> 
> regards,
> Ron
> 
> 
> > -----Ursprüngliche Nachricht-----
> > Von: "Jérémy Hanon" <J_HANON@xxxxxx>
> > Gesendet: 04.04.09 12:54:16
> > An: python@xxxxxxxxxxxxx
> > Betreff: [python] Re: Fwd: Re: Prothon
> 
> 
> > Hello Ronald, thanks for youre advice concerning irfanview, i allready
> have tried it out, hope i will make it a little better some day...
> > The foam i was talking about is not this insulation foam like some
> carbon homebuilders use. I meant a soft black foam like i used to use as
> camping-bed when i was younger and my back wasnŽt so delicate..;)
> > I will first of all just ad one or two layers on the side of Backpart of
> my seat to increase the contact-surface to my body. Hope it might help.
> > Jürgens comment about my Prothon encourages me a lot, there is a way to
> build a non-welded Python!...
> > I will send some more pics of the construction as soon i have time to
> resize and comment the pictures i have made.
> > A nice weekend to everybody, Jérémy Hanon
> > -------- Original-Nachricht --------
> > > Datum: Sat, 04 Apr 2009 11:47:52 +0200
> > > Von: "Stephan Schöling" <stephan@xxxxxxxxxxxxx>
> > > An: python@xxxxxxxxxxxxx
> > > Betreff: [python] Re: Fwd: Re: Prothon
> > 
> > > Hi Ronald,
> > > 
> > > for what is this insulation used normally ?
> > > Do you think of that 3mm thick foam, about 1m wide and rolled about 10
> m ?
> > > Normally used as "Trittschalldämpfung", noise absorber under parquet
> or 
> > > plank floors?
> > > 
> > > Stephan
> > > 
> > > Ronald Hongsermeier schrieb:
> > > 
> > > > Try Obi for some of their purple/pink insulation. 
> > > ============================================================
> > > 
> > > This is the Python Mailinglist
> > > 
> > > http://www.freelists.org/list/python
> > > 
> > > Listmaster: Jürgen Mages jmages@xxxxxx
> > > 
> > > To unsubscribe send an empty mail to 
> > > python-request@xxxxxxxxxxxxx
> > > with 'unsubscribe' in the subject field.
> > > 
> > > ============================================================
> > 
> > -- 
> > Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit
> allen: http://www.gmx.net/de/go/multimessenger01
> > 
> > 
> 
> 
> ============================================================
> 
> This is the Python Mailinglist
> 
> http://www.freelists.org/list/python
> 
> Listmaster: Jürgen Mages jmages@xxxxxx
> 
> To unsubscribe send an empty mail to 
> python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
> 
> ============================================================

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: 
http://www.gmx.net/de/go/multimessenger01
============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to 
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: