Don't go tearing anything up until you get a confirmation from Jürgen that I understood him correctly. I'm probably the most practically unengaged member of this list and may well not have construed what he said correctly. regards, Ron > -----Ursprüngliche Nachricht----- > Von: "Jérémy Hanon" <J_HANON@xxxxxx> > Gesendet: 04.04.09 20:27:26 > An: python@xxxxxxxxxxxxx > Betreff: [python] Re: Fwd: Re: Prothon > Ok Ron, > i will build a new seat, sooner then intended.... > I have no need to try to optimate something that is probably not going to > work, and if it helps i will let you know;) > Best regards,Jérémy > -------- Original-Nachricht -------- > > Datum: Sat, 04 Apr 2009 17:14:54 +0200 > > Von: Ronald Hongsermeier <rwhongser@xxxxxx> > > An: python@xxxxxxxxxxxxx > > Betreff: [python] Re: Fwd: Re: Prothon > > > Hello JeŽreŽmy, > > > > Irfanview is pretty easy to get used to and is quite powerful, really. > > > > On the seat, I think that Jürgen, if I understood him correctly was > > suggesting that you need more width in the structural part of the seat, not > > merely padding. I think your use of the foam you mentioned for padding is > > great, but it won't affect your bike control issues too much because it is > > just > > too mushy. (Again, this doesn't mean that you shouldn't use it-- just that > > the frame under it has to direct control moment from your body to the > > wheels through the frame and the better the seat frame contacts your hips > > and > > holds onto your upper body, the more sideways moment you will be able to > > apply to the frame with less effort and bodily _overcompensation_. It's the > > overcompensation that is making it difficult for you to ride in my opinion. > > > > regards, > > Ron > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: "Jérémy Hanon" <J_HANON@xxxxxx> > > > Gesendet: 04.04.09 12:54:16 > > > An: python@xxxxxxxxxxxxx > > > Betreff: [python] Re: Fwd: Re: Prothon > > > > > > > Hello Ronald, thanks for youre advice concerning irfanview, i allready > > have tried it out, hope i will make it a little better some day... > > > The foam i was talking about is not this insulation foam like some > > carbon homebuilders use. I meant a soft black foam like i used to use as > > camping-bed when i was younger and my back wasnŽt so delicate..;) > > > I will first of all just ad one or two layers on the side of Backpart of > > my seat to increase the contact-surface to my body. Hope it might help. > > > Jürgens comment about my Prothon encourages me a lot, there is a way to > > build a non-welded Python!... > > > I will send some more pics of the construction as soon i have time to > > resize and comment the pictures i have made. > > > A nice weekend to everybody, Jérémy Hanon > > > -------- Original-Nachricht -------- > > > > Datum: Sat, 04 Apr 2009 11:47:52 +0200 > > > > Von: "Stephan Schöling" <stephan@xxxxxxxxxxxxx> > > > > An: python@xxxxxxxxxxxxx > > > > Betreff: [python] Re: Fwd: Re: Prothon > > > > > > > Hi Ronald, > > > > > > > > for what is this insulation used normally ? > > > > Do you think of that 3mm thick foam, about 1m wide and rolled about 10 > > m ? > > > > Normally used as "Trittschalldämpfung", noise absorber under parquet > > or > > > > plank floors? > > > > > > > > Stephan > > > > > > > > Ronald Hongsermeier schrieb: > > > > > > > > > Try Obi for some of their purple/pink insulation. > > > > ============================================================ > > > > > > > > This is the Python Mailinglist > > > > > > > > //www.freelists.org/list/python > > > > > > > > Listmaster: Jürgen Mages jmages@xxxxxx > > > > > > > > To unsubscribe send an empty mail to > > > > python-request@xxxxxxxxxxxxx > > > > with 'unsubscribe' in the subject field. > > > > > > > > ============================================================ > > > > > > -- > > > Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit > > allen: http://www.gmx.net/de/go/multimessenger01 > > > > > > > > > > > > ============================================================ > > > > This is the Python Mailinglist > > > > //www.freelists.org/list/python > > > > Listmaster: Jürgen Mages jmages@xxxxxx > > > > To unsubscribe send an empty mail to > > python-request@xxxxxxxxxxxxx > > with 'unsubscribe' in the subject field. > > > > ============================================================ > > -- > Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: > http://www.gmx.net/de/go/multimessenger01 > ============================================================ > > This is the Python Mailinglist > > //www.freelists.org/list/python > > Listmaster: Jürgen Mages jmages@xxxxxx > > To unsubscribe send an empty mail to > python-request@xxxxxxxxxxxxx > with 'unsubscribe' in the subject field. > > ============================================================ > > ============================================================ This is the Python Mailinglist //www.freelists.org/list/python Listmaster: Jürgen Mages jmages@xxxxxx To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field. ============================================================