[python] Re: Fwd: Another Python incubating

try http://imageshack.us/
you dont even have to signup
you will get a link from them,
and you can post those links on the forum
good luck, Dirk Jan


On 10/10/07, Christoph Haller <christophhaller@xxxxxx> wrote:
>
> Sorry I forgot that you are probably not registered at "studivz". Does
> anybody have got a link where you can upload pictures for free?
>
> I attached the picture of the seat.
>
> -------- Original-Nachricht --------
> > Datum: Wed, 10 Oct 2007 18:35:58 +0200
> > Von: Stefan Bartels <sbartels@xxxxxxxx>
> > An: python@xxxxxxxxxxxxx
> > Betreff: [python] Re: Fwd: Another Python incubating
>
> >
> > Sorry, can't see your fotos, can't log in...
> > Stefan
> >
> > Leslie Sutch schrieb:
> >
> > >Is there a English picture site?
> > >
> > >-----Original Message-----
> > >From: python-bounce@xxxxxxxxxxxxx [mailto:python-bounce@xxxxxxxxxxxxx]
> On
> > >Behalf Of Christoph Haller
> > >Sent: October 10, 2007 10:05 AM
> > >To: python@xxxxxxxxxxxxx
> > >Subject: [python] Re: Fwd: Another Python incubating
> > >
> > >Hi Carl,
> > >my python is since a few months ready but I`m still optimising
> > operations.
> > >That includes also the seat. I decided for the mesh type because of the
> > >ventilation. The anatomic contour is given by two strips of wood which
> I
> > >laminate of plywood. The ribs arrange the needed suspension. I think it
> > >looks pretty good and is quite cheap. But sadly I´m too small (1,75 m).
> > The
> > >contour of the seat doesn`t fit to the contour of my backbone. You have
> > to
> > >be 1,90 m or so. Therefore I have to take potluck with the old seat so
> > far.
> > >
> > >here you can see a few pictures:
> > >
> > >http://www.studivz.net/editalbum.php?a=1&id=54R72Vg&e=1
> > >
> > >Cheers Christoph
> > >
> > >
> > >
> > >>Hi Pythonistas
> > >>   After seeing the photo of Tobias's nice newborn I thought you might
> > >>like
> > >>one of mine.
> > >>   After a long time of no progress (a year, opps) I've made a bit of
> > >>effort
> > >>& got as far as what you see in the photo.   The front is pretty much
> as
> > >>Jurgens design, the centre is a piece of tubing from a discarded
> weight
> > >>training bench (always looking at the rubbish bins to see whats
> > >>available!)
> > >>& the rear is a modified 26" MTB rear triangle with a 20" wheel using
> > the
> > >>BB
> > >>as the suspension pivot.  The front pivot is two 12mm rod ends.
> > >>  The only thing I'm not sure about yet is the seat, the only options
> > seem
> > >>to be homemade mesh type or a homemade hard type (maybe aluminium one
> > >>piece
> > >>or three separate parts). I can't find a plastic moulded seat to buy
> at
> > a
> > >>reasonable price ( i.e, very cheap to keep in the spirit of the
> > Python!),
> > >>anybody know of one? Any suggestions?
> > >>  Happy building & happier riding, Carl.
> > >>
> > >>
> > >
> > >
> > >
> >
>
> --
> Psssst! Schon vom neuen GMX MultiMessenger gehört?
> Der kanns mit allen: http://www.gmx.net/de/go/multimessenger
>
>

Other related posts: