[python] Re: Fwd: Another Python incubating

Sorry I forgot that you are probably not registered at "studivz". Does anybody 
have got a link where you can upload pictures for free?

I attached the picture of the seat. 

-------- Original-Nachricht --------
> Datum: Wed, 10 Oct 2007 18:35:58 +0200
> Von: Stefan Bartels <sbartels@xxxxxxxx>
> An: python@xxxxxxxxxxxxx
> Betreff: [python] Re: Fwd: Another Python incubating

> 
> Sorry, can't see your fotos, can't log in...
> Stefan
> 
> Leslie Sutch schrieb:
> 
> >Is there a English picture site? 
> >
> >-----Original Message-----
> >From: python-bounce@xxxxxxxxxxxxx [mailto:python-bounce@xxxxxxxxxxxxx] On
> >Behalf Of Christoph Haller
> >Sent: October 10, 2007 10:05 AM
> >To: python@xxxxxxxxxxxxx
> >Subject: [python] Re: Fwd: Another Python incubating
> >
> >Hi Carl,
> >my python is since a few months ready but I`m still optimising
> operations.
> >That includes also the seat. I decided for the mesh type because of the
> >ventilation. The anatomic contour is given by two strips of wood which I
> >laminate of plywood. The ribs arrange the needed suspension. I think it
> >looks pretty good and is quite cheap. But sadly I´m too small (1,75 m).
> The
> >contour of the seat doesn`t fit to the contour of my backbone. You have
> to
> >be 1,90 m or so. Therefore I have to take potluck with the old seat so
> far.
> >
> >here you can see a few pictures:
> >
> >http://www.studivz.net/editalbum.php?a=1&id=54R72Vg&e=1
> >
> >Cheers Christoph
> >
> >  
> >
> >>Hi Pythonistas
> >>   After seeing the photo of Tobias's nice newborn I thought you might
> >>like
> >>one of mine.
> >>   After a long time of no progress (a year, opps) I've made a bit of
> >>effort
> >>& got as far as what you see in the photo.   The front is pretty much as
> >>Jurgens design, the centre is a piece of tubing from a discarded weight
> >>training bench (always looking at the rubbish bins to see whats
> >>available!)
> >>& the rear is a modified 26" MTB rear triangle with a 20" wheel using
> the
> >>BB
> >>as the suspension pivot.  The front pivot is two 12mm rod ends.
> >>  The only thing I'm not sure about yet is the seat, the only options
> seem
> >>to be homemade mesh type or a homemade hard type (maybe aluminium one
> >>piece
> >>or three separate parts). I can't find a plastic moulded seat to buy at
> a
> >>reasonable price ( i.e, very cheap to keep in the spirit of the
> Python!),
> >>anybody know of one? Any suggestions?
> >>  Happy building & happier riding, Carl.
> >>    
> >>
> >
> >  
> >
> 

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kanns mit allen: http://www.gmx.net/de/go/multimessenger

Attachment: seat.jpg
Description: image/pjpeg

Other related posts: