[python] Re: Forwarding Ghislains Mail
- From: Dirk Bonne <dirk_bonne@xxxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Mon, 18 Apr 2005 11:44:00 +0200
Hi Ghislain!
good to see your on the list now!
Jürgen Mages wrote:
Do these figures remain good for him ? Or would he change them a bit
for his own python, If he were to do it again ?
I have the trouble, that there is not much space left between the pivot
and the front wheel. Sooner or later you will want to have fenders over
the front wheel, and then the space where the pivot, the fender and the
front breaks meet will really be crammed. Dunno a solution without
increasing the trail though.
It looks like Dirk got it right the first time, when it took us twice
to reach the same result : a more forgiving ridable python, at last
nearly (: >) ! Future will tell.
I would never have guessed that the seat height had so much influence.
When going from flevo->python I went down 7cms and I didn't really
notice much. Before 25hz wrote about his experiences, I thought seat
height is better lower then higher. Now, ok i understand that it takes
longer time to fall coming from up high, and thus more time to correct it.
Just as an info, I overlayed Ghislains picture once with a picture of my
bike, as a comparisation.
Dirk
Do these figures remain good for him ? Or would he change them a bit for his own python, If he were to do it again ?
It looks like Dirk got it right the first time, when it took us twice to reach the same result : a more forgiving ridable python, at last nearly (: >) ! Future will tell.
- References:
- [python] Forwarding Ghislains Mail
- From: Jürgen Mages
- [python] Forwarding Ghislains Mail
Other related posts:
- » [python] Forwarding Ghislains Mail
- » [python] Re: Forwarding Ghislains Mail
- » [python] Re: Forwarding Ghislains Mail
