[python] Exotic Tubing (was: Python of course!)
- From: "Eduardo L P Jr" <edulpj@xxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Thu, 11 Mar 2004 18:02:33 -0300
20 x 30 mm tubing is made here by bending and welding. The 0.9 mm is the
measure of the 20 BWG boards used to make the tubes.
They don't bend tubes less then 20 mm wide, because is very difficult to
weld them.
I'll solve the interference between the chainring and the right side of the
frame "crushing" some extension of the frame...
[]'s Eduardo
Ypê Bike: http://www.ypebike.cjb.net/
Ypê Mono: http://www.ype.unicyclist.com/
----- Original Message -----
From: "Jürgen Mages" <jmages@xxxxxx>
To: <python@xxxxxxxxxxxxx>
Sent: Thursday, March 11, 2004 4:22 PM
Subject: [python] Re: Python of course!
> Hola Eduardo,
>
> 20x30 mm tubing with 0.9 mm wall is even more exotic.
> Never saw this here in Germany. For my homebuilds I
> used 20x30x1.5 mm. The space between the chainwheel and
> the tire was too narrow and I had to insert thinner tubing here,
> as you can see here
> http://www.python.tieflieger.net/pics/front_part_without_wheel_detail.jpg
>
> good luck,
>
> Jürgen.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.601 / Virus Database: 382 - Release Date: 29/2/2004
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
Other related posts:
- » [python] Exotic Tubing (was: Python of course!)
