[python] Does vp1_version2 look ok?

Jürgen,

Thanks for the good suggestions! I ended up raising the BB by 1 deg, shortening the four bar linkage dimension Y by 1 cm, and shortening BB-FWA to 40 cm (BB - FWaP is 39.55 cm). Also ended up reducing ground clearance by 2 mm, but that doesn't count! Oh, and I used the smaller tires to determine proper heights, so it will be 7 mm taller with the bigger tires.

How does the result look? Do the numbers look ok?

Also, if seat height is EoS - 4 cm, then:
Height Diff between seat & BB: 320 mm

Hopefully most building will occur tomorrow!!

Michael

PS: So I need a 20" fork (made for a 20" wheel), right?

PPS: Thanks for the seat info -- it looks very cool, quite excited to try it out -- I was amazed watching the video and seeing the seat in motion!
============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: