[python] Re: Aluminium python


Beautiful!

Olaf


On 4 apr 2006, at 20.58, Ghislain Pillet wrote:


Hello all,
I've fully tested this new model I've just completed end of march, and I'm quite pleased.
Pivot angle 60°, negative trail 145mm, 20" wheels (same as my steel first model).
Aft main frame, bent aluminium pipe 60mm outside diameter, 2mm thick.
Front part and rear fork, oval aluminium pipes 45x23x2mm.
2 aluminium roller bearing housing 50mm diameter, length 60mm.
2 roller bearings diam 32mm for the front pivot and 2 for the suspension (DNM DV22)
Plywood 10mm for the seat.
Overall length, between axles 1,06m
Seat above ground 300mm, seat angle 40°.
Forward part, no suspension.
Overall weight 13 kg.
Cordially,
Ghislain.



<IMG_0612_1.jpg>

IMG_0612.JPG copy



============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: