[PWC-MEDIA] FOM-persbericht: FOM kent valorisatieproject toe aan ultrasoon schoonmaken
- From: info@xxxxxx
- To: undisclosed-recipients:;
- Date: Mon, 30 May 2011 12:40:27 +0200
English follows Dutch FOM kent valorisatieproject toe aan ultrasoon schoonmaken De Stichting FOM heeft een valorisatiesubsidie toegekend aan een consortium van de UvA onder leiding van FOM-werkgroepleider prof.dr. Mark Golden. Zijn team gaat samen met de FOM-werkgroep van dr. Rudolf Sprik en met dr. Luigi Scaccabarozzi van ASML onderzoeken of ultrasoon geluid gebruikt kan worden om maskers van de nieuwste extreem ultraviolet licht (EUV) lithografische machines te reinigen. De jury is van mening dat dit projectvoorstel heldere toepassingsdoelstellingen en grote industriële relevantie heeft. Het totale project heeft een omvang van 123.000 euro, waarvan FOM 53.000 euro bijdraagt, het Van der Waals-Zeeman Instituut van de Universiteit van Amsterdam 25.000 euro en ASML 45.000 euro. EUV=extreem lastig? ASML is wereldleider in de ontwikkeling van EUV-lithografie machines voor klanten die halfgeleiderchips fabriceren. In gewone UV-lithografie, is niet alleen het masker beschermd in een dun hoesje, maar zijn ook de kleinste maskerstructuren nog relatief groot. Deze combinatie maakt het proces relatief ongevoelig voor kleine stof- en vuildeeltjes, of andere verontreinigingen van het maskeroppervlak. In de nieuwste generatie chipmachines zet ASML EUV-straling in met kortere golflengtes, om nog kleinere details op de chips te kunnen belichten. Met deze EUV-techniek moeten de maskers bloot blijven. Daar komt bij dat de kwaliteit van de optische afbeeldingen nu ook gevoelig is voor heel kleine stof- en vuildeeltjes. Extreem UV gebruiken is dus extreem lastig. De UvA-werkgroepen zullen in dit valorisatieproject onderzoeken of - net als bij de juwelier - ultrasoon geluid gebruikt kan worden om de maskers een poetsbeurt te geven: dat verkort de down-time van de machine en reduceert de servicekosten. Dr. Freek Massee, recent gepromoveerd op het gebied van microscopie van quantummaterie, zal oppervlaktegevoelige probes inzetten. Masse wil nagaan of dit idee ook werkt in de praktijk, op substraten die ASML ter beschikking stelt. "Er breekt nu een spannend half jaar aan: op 15 november zal het consortium al een duidelijk ja/nee antwoord kunnen geven. Een ja zal natuurlijk geweldig zijn, maar ook een duidelijk nee is van nut voor ASML: een optie op de to try lijst kan worden doorgestreept. ASML had al haar investering toegezegd, maar het valorisatieprogramma van FOM bood ons meer financiële speelruimte om versneld dit voor ons out of the box onderzoeksidee uit te kunnen zoeken," licht Mark Golden toe. Valorisatie@FOM Dit is het vierde FOM-valorisatieproject waarmee FOM kennisbenutting van natuurkundeonderzoek op universiteiten wil stimuleren. De drie valorisatieprojecten voor universitaire werkgroepen die al gestart zijn, staan onder leiding van de FOM-werkgroepleiders dr. Rudolf Sprik, prof.dr. Martin van Hecke en dr. Davide Iannuzzi. Meer informatie Contact: prof.dr. Mark Golden, M.S.Golden@xxxxxx, (020) 525 63 63 Bijschrift bij de illustratie: De opstelling met oppervlaktegevoelige STM/AFM-probes die de onderzoekers gaan gebruiken in het nieuwe FOM-valorisatieproject. Als u geen prijs stelt op de persberichten van de Stichting FOM en u wilt uit het adressenbestand verwijderd worden, stuur dan een mail met uw gegevens naar info@xxxxxxx FOM awards valorisation project to ultrasound cleaning The FOM Foundation has awarded a valorisation grant to a consortium from the University of Amsterdam (UvA) led by FOM workgroup leader Prof. Mark Golden. Together with Dr Rudolf Sprik’s FOM workgroup and Dr Luigi Scaccabarozzi from ASML, his team will investigate if ultrasound can be used to clean the templates of the latest extreme ultraviolet light (EUV) lithographic machines. The jury believes that this project proposal contains clear valorisation objectives and has major industrial relevance. The project has an overall budget of 123,000 euros, of which 53,000 euros from FOM, 25,000 euros from the Van der Waals-Zeeman Institute of the University of Amsterdam and 45,000 euros from ASML. EUV = extremely difficult? ASML is a world leader in the development of EUV lithography machines for clients who produce semiconductor chips. In standard UV lithography, the template is protected in a thin sleeve but the smallest template structures are still relatively large. This combination makes the process relatively insensitive to small dust and dirt particles or other contaminants on the template surface. In the latest generation of chip machines, ASML is using EUV radiation with shorter wavelengths so that even smaller details can be etched on the chips. With this EUV technique, the templates must remain exposed and the quality of the images is now also sensitive to very small dust and dirt particles. Using Extreme UV is therefore far from easy. In this valorisation project, the UvA workgroups will investigate whether – just like at a jeweller – ultrasound can be used to clean the templates: that would reduce the down-time of the machine and the service costs. Dr Freek Massee, who recently gained his doctorate in the area of microscopy of quantum materials, will use surface-sensitive probes to determine of this idea actually works in practice on substrates that ASML makes available. "An exciting six months lie ahead of us: on 15 November the consortium will be able to give a clear yes or no answer. A ‘yes’ would be fantastic of course but a clear ‘no’ is also useful for ASML, as then one option on the ‘to try list’ can be crossed off. ASML had already promised its contribution, but the valorisation programme of FOM gave us more financial room to speed up our exploration of this out- of-the-box research idea," explains Mark Golden. Valorisation@FOM This is the fourth FOM valorisation project. With this programme FOM supports the valorisation of physics research from its institutes and university workgroups. The three valorisation projects for university workgroups that have already started are under the leadership of FOM workgroup leaders Dr Rudolf Sprik, Prof Martin van Hecke and Dr Davide Iannuzzi. More information Contact: prof.dr. Mark Golden, M.S.Golden@xxxxxx, +31 (0) 20 525 63 63 Caption: The experimental set-up with surface-sensitive STM/AFM probes that the researchers will use in the new FOM valorisation project. If you no longer wish to receive the press releases from FOM and you would like to be removed from the address list then please send an e-mail with your details to info@xxxxxxx Public Information Office | Stichting voor Fundamenteel Onderzoek der Materie (FOM) | Foundation for Fundamental Research on Matter (FOM) | PO Box 3021 - 3502 GA Utrecht - The Netherlands | Van Vollenhovenlaan 659 - 3527 JP Utrecht - The Netherlands | t: +31 (0)30 600 12 11 | f: +31 (0)30 601 44 06 | e: info@xxxxxx| w: http://www.fom.nl | Think before you print! Follow us on Twitter! www.twitter.com/StichtingFOM
Attachment:
Valorisatie project UvA ASML.jpg
Description: JPEG image
Other related posts:
- » [PWC-MEDIA] FOM-persbericht: FOM kent valorisatieproject toe aan ultrasoon schoonmaken - info