[pure-silver] Re: when lights?

As long as I'm still "proofing", I usually wait about 30 seconds even if I've determined by trial that ten seconds is actually enough - with the light level I have in my darkroom. 




--

Ole Tjugen

På Thu, 24 Jul 2008 18:21:47 +0200, skrev BOB KISS <bobkiss@xxxxxxxxxxxxx>:


DEAR LIST,

            Regarding processing B&W VC FB paper, I am very interested to
hear at what point in the (normal, not rapid) fixer you turn on the white
lights. Let's assume you develop and stop in your normal way and are using 
regular fixer.  I use the two fixer method; 5 min in the first fix and 5
more min in a very fresh second fix. But most of this is irrelevant to my 
question:
How long after you put your print in the first fixer do you feel it is safe to turn on the white lights? Do you wait the full 5 mins or do 
you feel it is safe earlier?

                        CHEERS!

                                    BOB
Please check my website: <http://www.bobkiss.com/> http://www.bobkiss.com/ 



"Live as if you are going to die tomorrow.  Learn as if you are going to
live forever".  Mahatma Gandhi






=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: