[pure-silver] Re: shamefully off topic

At 06:08 PM 5/21/2007 -0500, EJ Neilsen wrote:


P3 can be run in
a Jobo. You may be able to re plumb your CAP 40 to handle the P3, but I
don't think so.
Yes, P3 runs faultlessly in my JOBO. It is very cost effective. A 3.5 liter P-30 kit costs exactly the same as a 20 liter P3 kit. $150. B&H stocks P-30 but won't ship it.
A 20 liter P3 kit will process 66 20x24 prints and costs $150. A sheet of 20x24 Cibachrome costs $14. So if you use up a 20 liter kit with 66 20x24's, the total is ~$1,075 or ~$16.25 per print. Which is cheaper than LightJet prints even including Ciba test strips. The cheapest 20x24 LightJet (from a good lab) is around $25. Plus the cost or agony of scanning your film.
Jim 
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: