[pure-silver] Re: searching for a transmission densitometer check plaque

Shannon Stoney a écrit :
Hi, I am looking for the above, for a Macbeth TD502 densitometer. I have been trying to talk to the macbeth people for a while, and I am just put on hold forever until finally I am disconnected. Does anybody have an idea of where one of these might be found? I think Kodak used to make one. They are little pieces of negative calibrated to 3.0. 

--shannon

Hi Shannon !
I had luck with a calibrated Stouffer step wedge bought cheap ( http://www.stouffer.net ). The difficult part is to know exactly at what points calibration has to be made. 
For my old X-Rite it is at very low and mid range (04 and around 2.0)
The calibration tiles sold with the densitometer are, IMHO nothing more than a custom made step wedge a la Stouffer. 
Hope this helps.
--
Ce message est constitué d'au moins 50 % d'électrons recyclés.
S'il vous plaît, aidez nous à conserver nos ressources,
recyclez vos électrons !
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: