[pure-silver] Re: re-using DDX

> 
 Right now I'm processing some MF film:  HP5+.  I like a long scale.
 The paper scale with the enlarger I use now, and my last few boxes of
 Agfa paper, is about 1.3, I guess because of the diffusion head.

 So for MF film, what would minimal agitation be?


For MF as well as LF, use the Ilford times.  With 35mm, I invert and roll
alternating, every min down to 8 min then 2 min down to 4 and stand for the
last 4 min.  In other words, if the dev time is 12 min, I agitate 30 sec at
first then alternate invert and roll at 11,10,9,8,6 and 4 min.


But, didn't you say to add 50% to the development time? Is your 12 minutes time based on Ilford's recommendation of 8 minutes?

--shannon

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: