[pure-silver] Re: looking for omega carrier

Eric Nelson wrote:
> The D5 carriers differed in that on the bottom plate there is a raised
> frame that settles into the opening where the carrier sits thereby
> centering the carrier.  D2 etc carriers don't have that so you have to
> futz w/the placement so that the carrier is properly centered.
> Eric
>     I thought the D-5 used the same holders as the D-2, are
> they different?
> 
> --
> Richard Knoppow
> Los Angeles, CA, USA
> dickburk@xxxxxxxxxxxxx <mailto:dickburk@xxxxxxxxxxxxx>
> 

I have an original D-2 "pushup" that accepts both types of carriers.
Both types have notches cut into their back edge to engage the
positioning pins at the back of the enlarger assembly to assure
positive positioning.

-- 
----------------------------------------------------------------------------
Tim Daneliuk     tundra@xxxxxxxxxxxxxx
PGP Key:         http://www.tundraware.com/PGP/

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: