[pure-silver] Re: how critical is E6 temp and...

I haven't done any E6 in a long time, but the last time I did I used a fish tank, fish tank heaters and 2 air pumps to circulate the water through the tank. I kept the chemisty in mason jars that I could just put it all down in the bath and let it sit for a while before starting. It worked fairly well and cost was quite reasonable. ----- Original Message ----- From: "RobC" <forum@xxxxxxxxxxxxxxxxxxxx> 
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Monday, January 29, 2007 11:14 PM
Subject: [pure-silver] how critical is E6 temp and...
I've asked this elsewhere but thought I would ask here as well cos I know there are some colour experts among you all.
Two questions: firstly, how critical is E6 processing temp as I'm going to try for the first time using a makeshift water bath setup. As far as I have gathered so far, providing the temp doesn't vary by more than 1 degree during the first dev bath, I should be OK.
and secondly, is the full 6 bath E6 process worth doing as opposed to the shorter/quicker 3 bath E6 process and why? 

Thanks,

Rob

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there. 

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: