[pure-silver] Re: fixer composition (was Re: Re: PMK)

On Fri, 28 Apr 2006 11:06:28 +0100, "Paul Mead" <paul.mead@xxxxxxxxxxx>
said:

> > For small tank development, stop bath is unnecessary. I use water
> > rinse and it is totally adequate. However, if you prefer, you can use
> > a dilute acetic acid stop bath, or a buffered acid stop bath.

> I've started to use a water rinse stop recently because I was getting 
> unexplained pinholes in the emulsion (which have now gone away since I 
> changed) but since I can't control the temp of my running water, I use a 
> fill/agitate/dump routine using pre-heated filtered water - is this 
> going to be enough?

Yes. Also, some believe to the contrary but the temperature doesn't have
to be that close.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: